How To Make Glitter Tumblers And Seal Without Epoxy?

The days are changing. Now people are more concerned and worried about the environment. They want to use eco-friendly alternatives. As we know, the resin has recently become very popular; this gives a very good shine to the glitter and lets the glitters set in the right place.

But these are not eco-friendly.

Also, using resin takes a lot of work, But there are some new ways to make shiny tumblers without epoxy, which are sustainable and convenient. And the good news is you can make your eco-friendly Glitter Tumblers without 

Epoxy easily. And besides, if you are afraid of resin, the way we are showing it would be the right way to make the glitter tumblers. Custom k designs is a small family-based side hustle that was started when they started nursing school.

Don’t get me wrong but five or $6 for only four magnets. Epoxy free products for tumbler making! Epoxy fumes generated while mixing and curing are toxic, and you must work in a well-ventilated area for your safety.

First, you will need to adjust your spin. Flip’n awesome 3 in 1 paints, universal white, extreme protection, brite tone (bt) topcoats, black gloss and the epoxy-free tumbler kit that includes all of these.

For the project, they wanted to make lake Rabon tumblers. Fumes are produced for the entire time the tumblers are curing (so like 72 hours).

How to make a glitter tumbler/mason jar with no epoxy (with mod podge) sip your drinks in style with these DIY glitter mason jars!→ be sure to pin this video on your Pinterest board so you can go back and reference it when you need it.

They only use high-quality FDA compliant sealer so that it is safe for you to use daily. They like, they can’t keep buying those ‘cuz they just throw the money away. If possible, work outside in the fresh air.

If that’s not possible, you need to take some extra steps. If you already own a turner, this kit comes with everything you need to make your bulk batch of epoxy for decorating tumblers.

Suppose you are a custom tumbler maker and want to. If you don’t want to mask the top or bottom of your tumbler cup, you can skip this step. If you’d like to paint it, you certainly can! If you’re using epoxy, you can use spray paint.

They made a few this way, and over a year later, they still look great! Let them dry, and then spray a crystal clear enamel layer over all the pictures. Let them dry for 30 minutes or so and spray another layer.

Make it where the steel cup you are making is tight. Make sure the nut on the very end is tight. Make sure to remove the tape before the mod podge dries! Mod podge as a sealant on glitter tumblers DIY. Or you can use a Cricut print then cut feature. Trail stainless steel tumblers are customised with high-quality glitters and alcohol ink that is epoxy sealed for durability.

Pick out whatever pictures you want, size them, then print them on the glossy side of water slide decal paper. Finally, sand the entire outer surface until it’s scored. So, it’s up to you which way you want to go.

The acrylic tumbler needs to be hand washed to remove any factory residue. The easiest and more affordable way is to apply mod podge or triple thick over the top. Then use the adjustment knob to make the turner itself larger or smaller.

This first coat of clear resin will help the tinted resin blend, creating a marble effect as the tumbler turns. This is important so that your mod podge can create a mechanical bond. Though it is the last step, it is not the easiest step.

Turn the rotisserie motor on and, with the tumbler spinning, apply a clear coat of art resin, spreading it evenly over the entire surface with your gloved hands. We make custom tumblers, mugs, shirts, signs and more.

We, memory keepers, spin it into an epoxy kit. It wasn’t cost-effective for me to do it by the time they added in the epoxy and the time it takes to, you know, make it, then top it, then don’t coat it, etcetera.

When you prep a tumbler for fabric, you do it the same as you would on a regular glitter tumbler. You can make your tumbler cup with or without the free edge on the top or bottom.

Steps Of How To Make Glitter Tumblers Without Epoxy

In times in which people are more conscious about the future of our planet, the use of eco-friendly alternatives in cosmetics is highly demanded, and new ways of making shiny products are becoming popular.

For example, glitter tumbler is beloved by sparkle lovers, but the conventional way of making it is toxic for the environment and is turning many consumers into more sustainable alternatives.

Looking for some epoxy-free alternatives to glitter tumbler? Traditional glitter tumblers are toxic for the environment, so why not start making your eco-friendly glitter tumbler without epoxy? Here is what you need (and what you want) to make this happen!

Collect Materials

In the beginning, it is important to collect all the necessary equipment that will be needed during the process. This way, the process will be more organised and hassle-free.

• Stainless steel tumbler: can use any size and shape according to preference.
• Glitter that will be used on the tumbler. This can be one of several types of glitters. Pick the glitters for tumblers for a good result.
• Spray Paint: to cover the tumbler, first, it is necessary to have spray paint.
• Brush: A paintbrush will be needed to paint the tumbler and apply glue.
• Glitter glue: to reduce the number of layers
• Sandpaper: to make the surface smooth
• Once all those items are collected, you are ready to go.

Tape The Bottom

The first thing to do is to take up the areas that you don’t want to paint. Especially the bottom and the top part of the tumblers are not usually covered with glitter.

Next, take any date that doesn’t leave any group after peeling it off. Then by carefully maintaining the line, use the tape on the parts. Besides, you can choose some vinyl for tumblers.

Paint

Now it’s time to paint the bottle. For doing so, you have to go into open space. It would be great if the bottle could be painted in the year. Keep the tumbler on paper, hold the container colour away from the bottle and spray it.

Make sure every area of the bottle is tumbler equally. Now the tumbler needs to be dry properly. Try to keep it under the sun until it dries completely. Once the paint is dried, take the bottle inside the room. Additionally, you can check our review on silicone for mould making.

Add Some Glue

Time to add glue to the bottle. Take a soft painting brush with which the glue can be easily applied. Pour the glue in a small glass or a bowl, take the brush, dip it into the glue, remove excess glue from the brush, and then apply the Glue on the tumbler.

It is better to do this part quickly because the user has to make sure the glue doesn’t get dry before applying the glitters.

Applying The Glue

Finally comes the most awaited part, which is applying the glitter on the top of the container. As the tumbler is covered with glue, it is ready to have glitters all over it. Take the lead of the container and slowly start dumping them on the bottle.

Remember you have to rotate the tumbler as pouring the glitter. That is how the glitters will be placed evenly. Try to do the whole process on paper or a plate to reduce wastage. So that the excess glitters can be saved for later use.

Another Coat

See if you are satisfied with the first coat. There is no need to apply another layer of glitters if done properly at the first attempt. But for applying to another layer of glitters, you have to apply the glue again and follow the rest of the process that has been instructed before.

Before applying another coat, make sure that the previous layer of glitter is completely dried up. It is better to apply one coat of glitter to have a smooth finish.

Sanding

As no resin or epoxy has been used for applying the glitters so the outer layer of the glitter would be uneven. And that uneven part will not feel comfortable in hand.

Therefore take sanding paper and gently scrub on it. Now it’s all ready to use. So by following those seven easy steps, anyone can have amazing Glitter Tumblers without Epoxy.

Seal A Glitter Tumbler Without Epoxy

Using the best epoxy for tumblers is essential to make the item long-lasting, glossy, and water-resistant. However, overexposure to epoxy causes several serious health issues, such as dermatitis, chemical burns, and respiratory irritation.

This article will show you how to seal a glitter tumbler without epoxy. There are various ways to seal a tumbler without using epoxy. Instead, you can apply CrystaLac, Mod Podge, or a clear acrylic spray. All have advantages and disadvantages, so choose the one that’s most convenient for you.

What You’ll Need

• Stainless tumbler 
• Glitters
• Painter’s tape 
• Flat white paint
• Flat black paint
• Mod podge or adhesive spray
• Glue brush applicator
• Parchment paper
• Clear acrylic spray
• 220-grit sandpaper
• 91% rubbing alcohol
• 320-grit sandpaper
• Acetone
• Paper towel
• Silicone baking liner
• Condiment dispenser
• Silicone brush
• Nitrile gloves
• Mask and goggles

Prepare The Tumbler

1. Prepare your tumbler by sanding it and washing it with dishwashing liquid and water. You can also use a paper towel and 91% rubbing alcohol. The reason for this step is to remove the grit, grease, adhesives, and other substances that can affect your cup’s quality.
2. Tape off the part you don’t want to apply epoxy. (Optional)
3. Spray paint using your preferred base colour, but remember to use flat paint. The most commonly used colours are black or white.

Add glitter

1. Apply Mod Podge using the brush applicator. You can also use spray adhesive.    
2. Cover with glitters and gently tap to remove excess glitters. Add glitters to blank spots and tap again. Let it dry. 
3. Repeat steps A and B. 
4. Spray with E6000 glue spray and pat the glitters on with parchment paper. Let it dry for 24 hours. 

Apply CrystaLac

1. Apply a thin layer of CrystaLac and let it dry for 4 hours. Repeat and sand.
2. Continue applying the CrystaLac, sanding every two layers until you get the right thickness. The typical application is 8-10 layers, allowing 4 hours of drying between applications.
3. You can add your decals before the last two coats to seal in the decals. 
4. Clean off the excess finish with a coffee filter and rub alcohol or acetone. Be careful when wiping off the mess to avoid damaging the finish. 

Methods Of Sealing A Tumbler Without Epoxy

We included three methods you can use to seal your glitter tumbler without epoxy. Make sure to read through and take note of the pros and cons before making your choice.    

CrystaLac Method – Most Recommended

CrystaLac method is the most recommended alternative to epoxy. It gives the same shine as epoxy, but it does not have allergic reactions because it is water-based. We discussed the steps to seal a glitter tumbler without epoxy in the step-by-step instructions above, so check it out. 

Pros

• Safe to use
• Easy to apply
• Fewer quality issues on your finished tumbler

Cons

• Needs 8-10 applications or more depending on the thickness you want
• Requires 30 days to cure but can be used in 5 days
• Does not work with alcohol ink designs

Mod Podge Method

For this method, you’ll need two types of Mod Podge. Use the gloss lustre Mod Podge for the first three layers and the dishwasher-safe Mod Podge for the fourth and fifth layers. Note that the tumbler will be water-resistant but not dishwasher-safe.

Pros

• Kid-friendly
• Dries fast
• Seals in the glitters very well

Cons

• Not as shiny as epoxy

Directions

1. Carefully prepare your tumbler by sanding and washing it, then applying your flat paint. 
2. Apply Mod Podge with a brush applicator, then cover your tumbler with glitters. Let it dry. 
3. For the second and third layers, use a sponge to dab the Mod Podge to prevent the glitters from falling off. 
4. Lightly wet sand it with 12-grit sandpaper and wash off the glitter dust. Let it dry.  
5. Use the dishwasher-safe Mod Podge and apply using a sponge applicator.

Clear Acrylic Spray Method

You’ll need an oven for this method to help the clear acrylic spray cure well. 

Pros

• Easy to apply
• Dries faster

Cons

• Not as water-resistant as CrystaLac or epoxy

Directions

1. Prepare your Tumblr as recommended to remove all substances that may affect the adhesion of the glitters. Tape off the parts you don’t want to add glitters. 
2. You can spray your tumbler with flat paint so that the stainless steel finish of the tumbler. Let dry. 
3. Use Mod Podge to apply one layer of glitters, then sand lightly. Spray two layers of Krylon Resplendent Red Glitter Shimmer. Let it dry. 
4. Spray with Rust-Oleum Clear Gloss until well-covered. Bake it for 5 minutes at 200oF. Repeat twice or until you are satisfied with your finish. 

Common Issues When Sealing A Glitter Tumbler Without Epoxy

Here are some of the most common issues when dealing with glitter tumblers without epoxy. It’s important to be aware of them to help manage your expectations.  

Less Water Resistant Finish

Aside from the water-based CrystaLac, Mod Podge and clear acrylic spray do not have a water-resistant finish. This means that you cannot leave your tumblers in the water or other liquids.

Long Curing Time

CrystaLac takes five days to be thoroughly dried and 30 days to cure an inactive state. The other alternatives take less time, but the quality is not as good as epoxy. The clear acrylic finish can be baked to improve quality and curing time, but there’s no such luck for CrystaLac and Mod Podge.

Limited Design 

CrystaLac reacts with alcohol ink, so you cannot use this design for your tumblers. The Mod Podge also has limited application, and baking a clear acrylic finish is not always an option for all designs.

Limited Applications

Except for woodwork, you cannot use the alternatives to epoxy for tumblers for resin crafts like jewellery, keychains, coasters, and more. CrystaLac may work for these resin arts, but it takes longer to dry and cure.

Conclusion

Glitters are a great way to make the tumblers look attractive without using resin. This is a very common question about How to Make Glitter Tumblers without Epoxy. Some people think it is not possible.

But this is wrong information; even without the resin, it is possible to have a shiny tumbler. Just by following some steps, anyone can have a mesmerising outcome. So what you are waiting for, give the tumbler a go and show all its creativity.

If you are allergic to epoxy fumes, now you can make glitter tumblers without using one. The overall quality may not be the same, but it’s worth the try.

Although there are various alternatives on how to seal a glitter tumbler without epoxy, we found that CrystaLac is the best choice since it is water-based, does not contain aerosol, and does not induce allergic reactions.

The most significant disadvantage of using CrystaLac is the curing time, although epoxy also needs 30 days to be fully cured and inert. On that note, you can safely use CrystaLac-finish glitter tumblers after five days.

FAQs About Epoxy

What Can I Use Instead Of Epoxy For Tumblers?

Epoxy resin is a popular material for tumblers because it’s durable and can give your drink some extra insulation. However, if you’re looking for an alternative to epoxy resin, there are a few other materials you can try. One option is a polyester resin. So, are There Any Alternatives to Epoxy if You Want to Make Tumblers?

• Crystal (a water-based polyurethane)
• Clear Diamond Finish (a clear urethane)
• 2K Clear Glamour Clear Coat (a spray urethane)

How Do You Make Glitter Tumblers With Epoxy?

Instructions

1. Wash the tumbler.
2. Apply tape to the top (and bottom – optional).
3. Spray paint the tumbler if needed. Let it dry.
4. Apply a layer of mod podge with long even strokes.
5. Dump glitter all over while turning the tumbler, so the mod podge is all covered.
6. Remove tape.
7. Let dry fully (overnight).
8. Time to epoxy.

What Is The Best Glue To Seal Glitter Glue?

Choose a glue specifically formulated for longevity like Aleene’s OK To Wash-It Fabric Glue. Then, depending on the glitter pattern you’re sealing, use a fine brush to apply the glue in the thin layer to the product.

Allow 24 hours to dry.

The best spray glue for glitter is specifically designed for the job, and that is what Design Master glue is. The 11-ounce spray contains a fine mist adhesive formula designed to adhere to glitter and all things fine and sparkly.

Do You Need Epoxy For Glitter Tumblers?

And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler! IMPORTANT: Epoxy resin is toxic while curing, and safety precautions must be taken.

Using the best epoxy for tumblers is essential to make the item long-lasting, glossy, and water-resistant.

However, overexposure to epoxy causes several serious health issues, such as dermatitis, chemical burns, and respiratory irritation. In this article, we will show you how to seal a glitter tumbler without epoxy.

Can I Use Mod Podge To Seal Glitter On Glass?

You can use Mod Podge like epoxy resins to seal artwork, paint, wood, glass, and various other surfaces without any major issues, provided the surfaces are kept indoors or out of wind and rain.

Mod Podge can hold its own with epoxy in most situations if you are just looking for a sealing agent. Painting with Glitter Mod Podge This method of adding and sealing glitter onto glass is quick and easy.

You can use this glitter paint for glass and many other surfaces. For this project, you will need Your favourite glitter in any shape and thickness.

Are epoxy floors a good idea?

Extremely safe – Epoxy is a very safe coating for your hard floors. It’s slip resistant, shock resistant, and less abrasive than concrete and other types of industrial flooring. It’s also water resistant, and will protect your floor from any spills, including harsh chemicals that would harm other types of floor.

What are the disadvantages of epoxy flooring?

Cons of Epoxy Flooring

• Strong Application Fumes. During the epoxy application process, wet epoxy gives off an unpleasant smell. …
• Long Curing Time. …
• Slippery When Wet. …
• Economical Flooring Choice. …
• Resistant to Damage. …
• Weather-withstanding. …
• Aesthetically Pleasing. …
• Protects and Decreases Wear & Tear.

How long do epoxy floors last?

10 to 20 years   Long-Lasting, Environmentally-Friendly Floors Epoxy floors typically last 10 to 20 years and can last even longer with the proper maintenance and touch-ups. When it finally comes time to replace your floor, there will be no need for removal, and no need to throw away your old flooring.